CP24 INDUSTRIAL LED
MANUAL
EDITION 0.6
CP24 Luminaire w/ Standard Bracket
WIRING INSTRUCTIONS
MOUNTING BRACKET INSTALLATION
Adjust the angle of the light fitting, and line up bracket holes
to either the top or bottom mounting holes.
Step 3
Mount light fitting to appropriate location.
Fixed Plant Bracket
Mobile Plant Bracket
Step 1
Use Loctite® 222™ retaining compound (not included) to
secure the dome nut. Screw in and tighten bolts on both sides.
Use Loctite® 222™ retaining compound
(not included) to secure the dome nut.
Step 4
Page 1 / 2
aus.
1300 287 533 •
intl.
+613 8681 3633 • www.coolon.com.au
Product must be installed by a suitably qualified person. All documentation is subject to change without notice. Refer to our website for the latest information.
www.coolon.com.au
Ø12mm
50mm
50mm
Ø12mm
50mm
50mm
To adjust the mounting angle, unscrew bolt and
loosen dome nut.
Step 2
Ø13mm
50mm
50mm
Page 1 / 2
White (Positive)
Black (Negative)
24VDC IN
Steel Wire
Braided Cable
+ –
24VDC IN
Steel Wire
Braided Cable
232mm
108mm
265mm
211mm
216mm
Red (Positive)
Black (Negative)
White (0-10V Dimming)
CP24-ELV
CP24-DIM