8 USBG-4U2ML – Product Manual
www.coolgear.com
2.
Notes, Tips, Warnings, and Safety
Note
In some cases, during hardware installation, you will see an error message
said that the USB Hub caused the USB bus power over the current limit,
please ignore this message since the hub is hot plug and its power capacitor
will cause a very short period of current. It will NOT affect your USB function.
Reference Section 1.2 Hardware Installation.
Tip
N/A
Warning
N/A
Safety
•
Read the entire Product Manual before implementing this product for
your application. This manual contains important information about
electrical connections that must be followed for safe and proper
operation.
•
Inspect the product closely for visual defects before putting it to use.
•
Keep away from areas where moisture builds, this product contains
electrical components that can be damaged by moisture build up, this
can adversely affect your equipment connected to it.
•
Do not disassemble the product. Handling the product’s internal
components can expose it to ESD (Electro-Static Discharge) hazards
that can affect the function of the device.
•
If this product is not functioning properly, email our support team at
