6 Moving and setting up the appliance
ConvoVent 4 / ConvoVent 4+
52
Installing the front condenser for ConvoVent 4 (optional)
The following additional steps are necessary when installing the front condenser:
1.
Undo the 4 screws on the cover and the pairs of screws on the
left and right in the extraction hole and then remove the cover.
2.
Lift the two front condenser elements into the rails provided.
Make sure that the drip plate on the
front condenser elements is facing the back.
3.
Detach the aluminium adhesive tape from the inside of the
condensation hood cover.
Result:
The perforation holes are exposed.
