6 Moving and setting up the appliance
ConvoVent 4 / ConvoVent 4+
51
Installation on a stacking kit
The following additional steps are necessary when installing on stacking kits:
1.
Open the left side panel on the bottom appliance.
2.
Perform steps 7 to 12 as described above likewise on the bottom
appliance.
3.
Unscrew the blanking cap from the fixing flange on the rear of the
hood.
4.
Fasten the steam vent pipe supplied for the stacking kit hood to
the fixing flange.
5.
Make sure that the steam vent pipe is seated correctly and check
that the interfaces are sealed.
