2 For your safety
ConvoVent 4 / ConvoVent 4+
24
Installation, preparing for first-time use, taking out of operation and servicing
When installing or servicing the combi steamer, preparing it for first-time use or taking it out of operation,
be aware of the following hazards and take the specified preventive actions:
Danger
Where or in what situations does the
hazard arise?
Preventive action / Safety device
Risk of electric shock
caused by moisture
entering the wiring com-
partment
Installation not carried out properly
Follow the instructions in the manual for
installation
Risk of scalding from hot
steam
In front of the appliance door
In the hood's equipment room
Check safety device
use safety device
Only reach into the system once it has
cooled down
Safety device:
Venting position of appliance door
High hood fan extraction rate
A risk of burns from hot
components
Outside and inside the hood
Do not touch the baffle filters, mist
collectors or the interior directly after
opening the appliance door
Risk of injury from over-
stressing your body
When moving the hood
Only with enough people or appropriate
tools
Risk of crushing from hood
falling down
When the hood is not secured on the
combi steamer
When removing or fitting the hood
Fasten to the combi steamer
Wear personal protective equipment
Safety device:
Securing with fixing screws
Risk of crushing from the
combined units falling over
When fitting a hood to a combi steamer
Check that the combined units cannot
tip over
Ensure that they are fitted on a hori-
zontal and flat surface
Risk of electric shock if
equipotential bonding not
installed
On the appliance and on adjacent metal
parts
Incorporate hood in an equipotential
bonding system
Safety device:
Equipotential bonding system
