Convotherm 4 Table-Top, Руководство по эксплуатации

Страница: 119 / 144

5.3.4 Adding Cleaning Agent from Single-Measure Dispensing Bottles to the
Inside of the Oven Cavity
For your safety when using the unit
Before starting work, read and understand the rules, risks, and hazards specified in 'Safely Using the
Unit' on page 113 and follow all the corresponding instructions without exception.
Procedures that you must be familiar with
You will need to be familiar with the following steps:
■
Safely Opening and Closing the Unit Door 60
■
Supplying Cleaning Agents 93
Prerequisites
■
You must have started a cleaning profile that uses fully automatic oven cleaning with single-meas‐
ure dispensing. The software has prompted you to add either cleaning agent or rinse aid from a
single-measure dispensing bottle to the inside of the oven cavity.
■
You must have the necessary single-measure dispensing bottles containing cleaning agent and
rinse aid ready to go as required by the cleaning program you are using. Please refer to 'Supplying
Cleaning Agents' on page 93.
Adding Cleaning Agent from Single-Measure Dispensing Bottles to the Inside of the Oven Cavity
1.
■
Do not open the unit door until you are prompted to do
so by the software during the fully automatic oven
cleaning sequence.
■
Follow the software's prompts.
■
Depending on where in the cleaning sequence you are,
grab a single-measure dispensing bottle with cleaning
agent or a single-measure dispensing bottle with rinse
aid.
WARNING! Chemical burn hazard and skin, eye, and res‐
piratory tract irritation hazard
■
Be careful not to come into contact with cleaning agent
or rinse aid when dispensing the contents of the single-
measure dispensing bottles into the oven cavity.
■
Wear the required personal protective equipment.
2.
■
Unscrew the single-measure dispensing bottle's cap.
■
Make sure that the seal on the bottle remains undam‐
aged.
5 How to Clean the Combi Steamer
Operating Manual 119