Convotherm 4 easyDial, Руководство по эксплуатации

Страница: 28 / 61

4.9 Cooking Workflow with Pre-Heat Function
Prerequisites
■
You must have entered a new cooking profile or opened one from the 'Cookbook'.
■
The oven cavity temperature must be too low for the selected cooking profile.
Cooking workflow
1
The oven temperature is too low
The unit will make the 'Pre-heat' indicator flash in
order to indicate that the oven cavity should be
manually pre-heated. The C-Dial will light up with a
solid green light.
2
Pre-heating
After the 'Pre-heat' button is pressed, the unit will
automatically heat up the oven cavity to the cook‐
ing temperature set in the cooking profile. During
pre-heating, the C-Dial will light up with a solid yel‐
low light.
3
The unit keeps the oven cavity temperature con‐
stant
Once the oven temperature is reached, the C-Dial
will flash with a green light. At this point, the unit
will start keeping the oven temperature constant.
The unit prompts the user to put the food inside the
oven
An acoustic signal asking for the food to be put in‐
side the oven will be emitted and the 'Open unit
door' prompt indicator will light up at the same time.
4
Loading
While food is being put inside the oven, the C-Dial
will light up with a solid yellow light.
5
Starting
After the unit door is closed, the C-Dial will light up
with a solid green light. Pressing the C-Dial will
start the cooking sequence.
6
Cooking
The cooking sequence will start. The unit will start
displaying the remaining cooking time or the inter‐
nal temperature reached, as applicable. The C-Dial
will light up with a solid red light.
4 Cooking with easyDial
28