4 Transportation
4.1 Transporting the unit to the installation location
Required space during transportation
Make sure that the transportation route you will be following has enough space to accommodate the
unit's entire width and height at all times.
The following table lists the dimensions for the units together with their packaging. This list can be
used to figure out the required minimum door width and height required in order to be able to get the
unit to its intended installation location:
6.06 mini
6.10 mini
10.10 mini
Width
[in]
22.8
22.8
22.8
Height
[in]
37.6
37.6
47.0
Depth
[in]
29.1
35.8
35.8
Transporting the unit to the installation location for the first time
Observe the following when transporting the unit:
■
Always use a pallet to transport the unit.
■
Always keep the unit upright when moving it.
■
Transport the unit slowly and carefully and secure it in such a way that it cannot tip over.
Make sure not to bump into the unit.
Avoid uneven transportation routes and steep inclinations.
The following additionally applies to unit size 10.10 mini:
■
Use a pallet jack or forklift to lift the unit.
4.2 Preparing for Unpacking
Preparing for unpacking
Observe the following before unpacking the unit:
■
Check the outer packaging for damage.
■
Take the supplemental sheet with unpacking instructions from the shipping documents.
4 Transportation
Installation Manual
28
