3.7
Staff and Work Area Requirements
Staff requirements
The table below specifies the qualifications needed for each role. Provided that they have the required
qualifications, a single person can take over more than one role if necessary.
Role
Required qualifications
Tasks
Combi oven own‐
er
or
the owner's em‐
ployee who is re‐
sponsible for the
unit and for the
staff operating it
Is familiar with the rules involved in han‐
dling heavy loads
■
Briefed on all of the combi oven's
safety-relevant functions, mecha‐
nisms, and devices by the person
placing the unit into operation so
that the information can be relayed
to all the staff operating the unit
■
Shown how the unit is operated by
the person placing the unit into op‐
eration so that the information can
be relayed to all the staff operating
the unit
■
If necessary, helping out as direc‐
ted with transportation within the
facilities and with setting up the
unit
Mover
■
Trained in the use of forklifts and/or
pallet jacks
■
Is familiar with the rules involved in
handling heavy loads
Transporting the unit within the facili‐
ties
Service technician
■
Qualified staff from an authorized
service company
■
Has relevant technical training
■
Has unit-specific training
■
Is familiar with the rules involved in
handling heavy loads
■
Is able to assess whether the unit's
power, water, and drain connections
have been correctly set up.
■
Setting up the unit
■
Installing the fully automatic oven
cleaning system (optional)
■
Placing the unit into operation
■
Removing the unit from service
Electrician
■
Qualified staff from an authorized
service company
■
Has relevant training
■
Is a qualified electrician and is familiar
with the technical standards that must
be applied
■
Connecting the unit to the electri‐
cal connection at the facilities
■
Uninstalling electrical connections
Water and waste‐
water installer
■
Qualified staff from an authorized
service company
■
Has relevant training
■
Connecting the unit to the water
connection at the facilities
■
Uninstalling water connections
■
Connecting the unit to the drain
connection at the facilities
■
Uninstalling the drain connection
Person placing the
unit into operation
(service techni‐
cian)
■
Is an employee from an authorized
service company who is responsible
overall for placing the unit into opera‐
tion
■
Has relevant technical training
■
Has unit-specific training
■
Is familiar with the rules involved in
handling heavy loads
■
Is able to assess whether the unit's
power, water, and drain connections
have been correctly set up and is fa‐
miliar with the technical standards
that must be applied.
■
Briefing the owner or the responsi‐
ble employee
■
Checking all steps and conditions
as per the checklists
3 For Your Safety
Installation Manual
25
