Figure 21: Configuring connections
8. TimeOut specifies the time period the Convision V6xx remains connected to the
provider after the last data has been transferred. 55 seconds is the default time
period. If desired, enter a different time in seconds (max. 99999 seconds).
9. Deactivate the checkbox if you want to terminate the connection immediately after
the last data has been transferred or upon interruption of the data stream.
10. Enter the DNS server of the provider (refer to Chapter 10.8 – The Domain Name
Service).
The following data needs to be entered only if you want to use this connection for
sending e-mail or SMS!
11. Enter the SMTP server (mail server) of the LAN or your provider.
12. Enter the address of the sending Convision V6xx A. This address must be
registered with the provider.
13. Select the authentication method as required by the provider.
14. Enter the user name and password (refer to Chapter 10.6).
)
Note: If your provider does support channel bundling but it is not possible to
bundle the two lines, the connection will be terminated with an error message in the
status display (refer to Chapter 9.1.12).
Manual
- 39 -
