9 Configuration
If the configuration protection function is activated, only the administrator is
permitted to change the settings in this menu.
9.1 System
Settings
Use this menu for making general system settings. These include the connections,
security settings, uploading various files, activating the FTP server and assigning the
serial interfaces. In addition, this menu also provides the Event log. The event log
records the configurations you made, system processes and errors that occurred.
9.1.1 LAN/Ethernet
Connection
Data
If you want to integrate your Convision V6xx A in a LAN using a permanent IP
address, you can enter various IP addresses via this menu.
IP Addresses
Figure 18: Configuring the IP addresses
During the initial configuration using IPSetup (refer to Chapter 6.2 or 6.3), you have
already assigned an IP address and a network mask. This data is now displayed on
this page. You can change this if desired. After a change you will be prompted to
reboot the device. For this purpose, click the "Reboot" button.
)
Note: If your Convision V6xx A is connected via ISDN only, i.e. you assigned an
MSN at initial configuration (refer to Chapter 6.1), these fields will be blank. You do
not need to enter any data.
If you do not know the individual IP addresses, ask your system administrator.
The IP address must be unique, i.e. it must not be assigned to another computer in
the network. You can use the Ping command to check whether or not an IP address
is still available for the Convision V6xx A (refer to document “Convision System
- 34 -
Convision V600 A Series
