Convision V600 A, Руководство пользователя

Страница: 27 / 90

8.2 Playback (Convision V610 A only)
In the "Play" menu you can view the images saved on the available partitions.
Requirements
♦
First of all, you have to create at least one partition on the hard disk (refer to
Chapter 9.5.1).
♦
Start a recording (to start a recording manually, refer to Chapter 8.3, for a time-
controlled or event-controlled start, refer to Chapter 9.3).
♦
After images have been stored on at least one partition, start the playback
function.
Description of the Numbers behind the Partitions
Long time partition The numbers in square brackets behind the partition
specify: [the number of recorded images per camera
•
the number of cameras recording on this partition]
In our example, the total number of images on partition 2
is
42 x 5 = 210
Event partition The numbers in square brackets behind the partition
specify: [the number of recorded images
•
the number of
events which have already occurred]
In our example, the number of images per event on
partition 2 is
840 / 14 = 60
If a partition does not have any images, the icon shown
on the left-hand side is displayed.
If a camera should temporarily fail, the icon shown on
the left-hand side is displayed. If there are several
cameras recording on a partition, the symbol will appear
for each image the failed camera should have recorded.
1. Select the desired partition.
2. Select the desired camera and the program to be used for displaying the images,
i.e. either Live-optimized or Live-compatible refer to Chapter 10.2).
Manual - 27 -