Convergent Design Gemini 4:4:4, Руководство пользователя

Страница: 9 / 29

Gemini 4:4:4 User Manual v
v v
v1.1
1.1 1.1
1.1
www.Gemini444.com 9 | P a g e
RECORD
Dropdown Dropdown Dropdown Dropdown Sub Sub Sub Sub----Item Item Item Item
Sub
Sub Sub
Sub----
Menu 3 Menu 3 Menu 3 Menu 3
Option Option Option Option Description Description Description Description Additional Information Additional Information Additional Information Additional Information
TRIGGER TRIGGER TRIGGER TRIGGER
Rec Button
→ →
Recording is started by touching the
record button on the Gemini screen
SDI TC
→ →
Recording will start when
incrementing timecode is detected
from the SDI input and will stop
recording when timecode is not
incrementing
This mode is particularly useful
when wanting to trigger a record
session from your camera's record.
However, your camera will most
likely output incrementing
timecode while it is playing back
video. This will also trigger a record
in the Gemini. Therefore, this setting
may need to be turned off while
your camera is in playback mode
TYPE
TYPE TYPE
TYPE DPX
→ →
In this mode, the Gemini will save
recorded video into a .dpx file. See Transfer, page xxx, for
more info on file types.
CLIP CLIP CLIP CLIP (AAAAAAAA)(000)
→ →
Allows the user to set the name of
the recorded files
The last three digits will auto-
increment from one recording to
the next. If you are using more than
one Gemini unit, it is recommended
that at least the first two characters
of this name be set different from
one Gemini unit to the next
OUTPUT OUTPUT OUTPUT OUTPUT
Sub Sub Sub Sub----Menu Menu Menu Menu Sub Sub Sub Sub----Menu 2 Menu 2 Menu 2 Menu 2
Sub Sub Sub Sub----
Menu 3 Menu 3 Menu 3 Menu 3
Option Option Option Option Description Description Description Description Additional Information Additional Information Additional Information Additional Information
Rec Tally Rec Tally Rec Tally Rec Tally
On
→ →
When the Gemini is recording, the
SDI and HDMI output will display a
red bar on the bottom of the screen
to indicate an active record This red bar is not recorded in the
Gemini. If you are using a separate
recorder to record the output of the
Gemini, turn this setting off
Off
→ →
Nothing will be overlaid on the SDI or
HDMI output of the Gemini
Mode
Mode Mode
Mode
4:2:2
→ →
SDI output as 4:2:2; works in both
Rec and Play Mode.
This setting only affects the output
video. 4:2:2 Input will always be
converted to 4:4:4 for recording.
4:4:4
→ →
Incoming video will be output as
4:4:4
Use this setting if you want to
output 4:4:4 RGB, usually Dual Link
HD-SDI. (Not valid with 4:2:2 input.