Draining the Air Conditioner
! Always replace the drain plug
immediately after draining.
To drain the air conditioner, place it over a
drain or put the drain tray (provided) under
the drain point before unscrewing the cap
and removing the drain plug, as the water will
flow out as soon as the plug is removed.
Remove the plug at the bottom rear of the
appliance and allow the tank to completely
drain (Fig 16B).
Note
End of season storage
:
Always disconnect the air conditioner from the electricity mains before
cleaning or draining.
To maximize the efficiency of the air conditioner, clean regularly.
Cleaning the housing
Cleaning the filter
Note! Never operate the air conditioner without the filter.
Use a soft, damp cloth to wipe the body clean.
Never use aggressive chemicals, spirits, detergents, chemically treated cloths, or
other cleansing solutions. These substances could possibly damage the cabinet
Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt from the
filter and then rinse thoroughly under running water (no hotter than 40°C).
Dry thoroughly before replacing.
Take care to replace the filter back into the track at the rear of the holder.
.
Remove the filter as shown (Fig 16A).
·
·
·
·
Drain any water from the unit.
Operate the unit in ventilation only mode for a few hours, to
thoroughly dry the inside.
Clean or change the filter.
Replace in the original carton or cover for storage.
Unplug and carefully store the power cord and plug end.
·
16 A
B
Remove screw and
lift filter holder from
the compartment.
MAINTENANCE
10
