Convaid Safari Tilt Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 38

Convaid Safari Tilt Скачать руководство пользователя страница 19

POSITIONING GUIDE

16

Lateral Thigh Support (Adductor)

Fig.54

Fig.55

Pulls thighs together, improving hip
alignment and stabilizing seating
position. Degree of adduction can be
varied and can favor one side. Fold
the adductor flaps over the thighs,
wrap the straps under and around
the armrest tube and attach with
buckle.

Fig. 54

The adductor is attached with
Velcro® under seat tubes.

Separates thighs to improve hip
alignment and stabilize sitting
posture. Degree of abduction can be
varied and can favor one side. The
abductor flaps wrap over the user’s
thighs from the inside to the outside.
The straps buckle around the seat
tube or the armrest. They can also be
wrapped around the armrest tube
twice for high tone children.

Fig. 55

The abductor is attached with
Velcro® under seat tubes.

Medial Thigh Support (Abductor)

Heavy-duty, reinforced, padded
seat and seat back come with
pockets which have removable
plastic stiffeners. Use when
extra firmness is required.
Stiffeners easily lift out of pock-
ets for custom-forming with a
heat gun.

Fig. 56

Fig.56

Heavy-Duty Reinforced Upholstery

«
...
17
18
19
20
21
...
»

Содержание Safari Tilt







































Отзывы:

Нет отзывов