CONTROL SOLUTIONS Babel Buster 3 BB3-6101-GW Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 56

CONTROL SOLUTIONS Babel Buster 3 BB3-6101-GW Скачать руководство пользователя страница 29

6. Error Counts and Packet Log

6.1 Reviewing Error Counts

The Error Counts page is the first place to look if you are not getting the responses
you expect. Messages are tabulated by RTU address regardless of operating mode.
Total messages tabulates all messages including exception messages and requests
that get no response. The number of times a device fails to respond is tabulated. The
number of times a CRC error is detected on the RTU link is tabulated. The number of
times an exception message is sent is tabulated, and the exception code found in the
most recent exception message is logged. Exceptions can be generated by this
gateway, or by the device to which a request was sent. Regardless of the origin of the
exception, it is tabulated and logged here.

6. Error Counts and Packet Log

file:///C:/AAA_CSI/Literature/2021 User Guides/BB3-6101-MX-61 Use...

1 of 6

5/4/2021, 9:56 AM

«
...
27
28
29
30
31
...
»

Содержание Babel Buster 3 BB3-6101-GW

























































Отзывы:

Нет отзывов