CONTROL SOLUTIONS Babel Buster 2 BB2-7010 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 90

CONTROL SOLUTIONS Babel Buster 2 BB2-7010 Скачать руководство пользователя страница 4

registers in BACnet objects you assign. The BACnet system may then use standard BACnet services such
as Read Property to access the content of the Modbus registers. The BB2-7010 will also accept COV
subscriptions such that other devices will receive a COV notification when the content of a Modbus register
changes.

The BB2-7010 can be also configured as a Modbus RTU slave. This is useful when a PLC wants to write
data to the BB2-7010, thereby making the PLC's data available as BACnet object properties.

The BB2-7010 can be configured as a BACnet IP client. This means the BB2-7010 will be reading and
writing properties in other BACnet devices, storing copies of their object's Present Value in the BB2-7010.
The stored values may later be accessed by Modbus or SNMP.

1.3 Important Safety Notice

Proper system design is required for reliable and safe operation of distributed control systems
incorporating any Control Solutions product. It is extremely important for the user and system
designer to consider the effects of loss of power, loss of communications, and failure of
components in the design of any monitoring or control application. This is especially important
where the potential for property damage, personal injury, or loss of life may exist. By using
ANY Control Solutions, Inc., product, the user has agreed to assume all risk and responsibility
for proper system design as well as any consequence for improper system design.

1.4 Warranty

This software and documentation is provided “as is,” without warranty of any kind, either expressed
or implied, including, but not limited to, the implied warranties of fitness or merchantability for a particular
purpose. Control Solutions may make improvements and/or changes in this documentation or in the
product(s) and/or the program(s) described in this documentation at any time. This product could include
software bugs, technical inaccuracies, typographical errors, and the like. Changes are periodically made to
the information herein; these changes may be incorporated in new editions of the software.

1. Overview

file:///C:/AAA_CSI/Literature/2015 User Guides/BB2-7010/BB2-7010 ...

2 of 2

10/16/2015 12:30 PM

«
...
2
3
4
5
6
...
»

Содержание Babel Buster 2 BB2-7010



























































































Отзывы:

Нет отзывов