11
Package contents
• ZCA-WMS10-2-ZP Wireless Motion Sensor
or
ZCA-WMS10-2EXT-ZP Wireless Motion Sensor (External
Antenna)
or
ZCA-WMS10-2L-ZP Wireless Motion Sensor-Line Powered
or
ZCA-WMS10-C-ZP Wireless Motion Sensor (Ceiling Mount)
or
ZCA-WMS10-CL-ZP Wireless Motion Sensor (Ceiling Mount,
Line Powered)
• Wall mount swivel bracket (1)
• Wall mounting screws (2)
• Plastic drywall anchors (2)
• 9V alkaline battery (ZCA-WMS10-2-ZP and ZCA-WMS10-
2EXT-ZP only) (1)
Features
The Wireless Motion Sensor works with your Control4® system
and combines the features of a passive infrared (PIR) motion
sensor with ambient light sensing detection into a single device.
A feature-rich Composer
Properties
page enables high levels of
control without programming scripts.
The Wireless Motion Sensor adds even more intelligent home
automation to trigger and control events throughout the
Control4 system based on object motion, occupancy, and room
ambient lighting levels. Automatically control room lighting,
pathway lighting, exterior lighting, HVAC, and audio/video
applications either inside or outside the home.
The Wireless Motion Sensor also “greens” up the Control4-
automated home by enabling occupancy-based automation
controls. Used in concert with additional Control4 certified
products such as wireless sensors, relays, dimmers, and
motorized window coverings, the motion sensor can control
heating, cooling, and lighting systems to help comply with
environmental policies—California Title 24, and Canada’s NBC
2005, for example—while conserving resources and saving
money on utilities.
• Automated control of lights based on room occupancy
• Alerts when someone enters front walkway
• Detection of outdoor light levels for dawn/dusk events
• Automated pathway lighting
• Any other control application you can devise and safely
integrate!.
Requirements
• Control4 controller
• Composer Pro 1.8.0 or higher
Important safety instructions
Important:
Using this product in any manner other than
outlined in this document voids your warranty. Also,
Control4 is NOT responsible or otherwise liable in any
way for any damage resulting from the misuse of this
product. See
ctrl4.co/warranty
for details.
Specifications
Model numbers
ZCA-WMS10-2-ZP, ZCA-WMS10-2EXT-ZP,
ZCA-WMS10-2L-ZP, ZCA-WMS10-C-ZP,
ZCA-WMS10-CL-ZP
Motion detection
method
Passive infrared (PIR)
Coverage
110°-160° wide angle lens 10-50 ft (3 m-15 m) depending on
sensitivity setting, mounting angle (for wall-mount), and
temperature. Motion sensors may be cascaded together to
improve coverage.
Recommended
mounting height
Wall mount: 7 ft nominal (2.1 m). Variable, dependent upon
desired application.
Internal light sensor
measurement range
~0.1 lux to 10,000 lux
LED indicator
Red LED to indicate motion upon initial power up or after a
programming change is sent from Composer.
Unit dimensions
Wall mount: 1.8 × 2.5 × 3.4 in (47.6 × 63.5 × 85.7 mm)
without antenna
Power source
9V alkaline (included with WMS10-2-ZP and ZCA-WMS10-
2L-ZP) or lithium battery. 9-24V AC/DC power adapter
(model no. MPS10A) also available for wall mounts only.
Power usage
~17mA fully active
Estimated battery life
One to two years, depending on usage (standard 9V
alkaline battery), lithium battery will provide longer use.
Environmental
Water resistant. IP44 (Splash Proof) rated. The Wireless
Motion Sensor is
not
waterproof and must be kept out
of direct contact with water. The product must
not
be
immersed.
Operational
temperature
-20°F to 158°F (-28°C to 70°C)
Humidity
5% to 95% non-condensing
Control4 support
WMS10-2: Control4 OS 1.7.2 or greater
WMS10-2-ZP: Control4 OS 1.8.0 or greater
Wireless
specifications
IEEE 802.15.4 ZigBee® mesh networking
Wireless Motion Sensor
Installation Guide
