2.4.2 RBT270 Class 7 Roller Brake Tester
CERTIFICATE OF ACCEPTANCE
ROLLER BRAKE TESTER (RBT)
Brand:
CONTINENTAL
Model:
RBT270
Equipment Identification Number:
EINCBR20644A112094--
Software Version (& above):
V2.00
Suitable to testing (ATL):
Classes 4 & 7
Suitable to testing (Non ATL):
Classes 3, 4 & 7
This is to certify that the above Brake Tester meets the requirements of the DVSA 2005RBT
Specifications, including annexes 1, 2 and 3, for the Classes listed above.
The above brake tester has been tested and certified as meeting the test equipment interface specification
(2019) for data transfer to and from the MOT Testing Scheme (MTS)
4 November 2020
Chief Executive
Date
For and on behalf of the Garage Equipment Association (GEA), administrators of the DVSA
equipment approval scheme
For Manufacturers/Importers use
I certify that the test equipment of the above make and model, bearing the serial number: …………………...…
is installed in VTS No:
……………………….
and is suitable for MOT testing.
VTS Details:
Name
…………………………………………………………….…..
Address
…………………………………………………………………
…………………………………………………………………
Postcode
…………………………………………………………………
Supplier’s Details:
Name
……………………………………
Position
……………………………………………
Signature
……………………………………
Company
……………………………………………
GARAGE EQUIPMENT ASSOCIATION LIMITED
2/3 Church Walk, Daventry, Northamptonshire. NN11 4BL UK
Tel: +44 (0) 1327 312616
fax: +44 (0) 1327 312606
email: [email protected]
website: www.gea.co.uk
Registered in London No. 2891852
Stuart Clarke
Product Manager
Continental Automotive Trading UK Ltd
I324444Iss 1
Operating Manual RBT240 / RBT270
Operating Manual RBT240 / RBT270
8
9
2.4
Certificates of Acceptance
2.4.1
RBT240 Class 4 Roller Brake Tester
CERTIFICATE OF ACCEPTANCE
ROLLER BRAKE TESTER (RBT)
Brand:
CONTINENTAL
Model:
RBT240
Equipment Identification Number:
EINCBR20612A112093--
Software Version (& above):
V2.00
Suitable to testing (ATL):
Class 4
Suitable to testing (Non ATL):
Classes 3 & 4
This is to certify that the above Brake Tester meets the requirements of the DVSA 2005RBT
Specifications, including annexes 1, 2 and 3, for the Classes listed above.
The above brake tester has been tested and certified as meeting the test equipment interface specification
(2019) for data transfer to and from the MOT Testing Scheme (MTS)
4 November 2020
Chief Executive
Date
For and on behalf of the Garage Equipment Association (GEA), administrators of the DVSA
equipment approval scheme
For Manufacturers/Importers use
I certify that the test equipment of the above make and model, bearing the serial number: …………………...…
is installed in VTS No:
……………………….
and is suitable for MOT testing.
VTS Details:
Name
…………………………………………………………….…..
Address
…………………………………………………………………
…………………………………………………………………
Postcode
…………………………………………………………………
Supplier’s Details:
Name
……………………………………
Position
……………………………………………
Signature
……………………………………
Company
……………………………………………
GARAGE EQUIPMENT ASSOCIATION LIMITED
2/3 Church Walk, Daventry, Northamptonshire. NN11 4BL UK
Tel: +44 (0) 1327 312616
fax: +44 (0) 1327 312606
email: [email protected]
website: www.gea.co.uk
Registered in London No. 2891852
Stuart Clarke
Product Manager
Continental Automotive Trading UK Ltd
I324443 Iss 1