SLIDING GLASS DOOR
DISPLAY REFRIGERATOR
REFRIGERATORS
Utilizing Environmentally Safe, CFC-free R-134a Refrigerant
Standard Features
• Modern, State-of-the-Art Styling
• Performance Rated Refrigeration System Utilizing
Environmentally Safe R-134a Refrigerant
• 3" Non-CFC Polyurethane Foam Insulation
• Self-Closing Doors
• Cylinder Lock in Each Door
• Automatic Electric Condensate Evaporator
• 6" Stainless Steel Legs
• Heavy Duty, Epoxy-Coated Steel Shelves
• External Dial Thermometer
• Double-Pane, Tempered Sliding Glass Doors
• Fluorescent Interior Lighting
Options & Accessories
Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)
•Half Door
•Remote
•Pass-Thru
(Glass One Side Only)
•Pan Slide Assemblies
•Casters
•Stainless Steel
Shelves
•Consult Factory
DL2R-SS-SGD
Refrigeration System
A “Performance Rated”, air cooled, hermetically
sealed, capillary-type refrigeration system is installed
on the top of each refrigerator. Plasticized fin coil and
air circulating fans are contained within a concealed
“plug” type insulated housing, readily accessible on
top of the cabinet and separate from the food zone to
increase food storage capacity. The entire “plug” sys-
tem is fully charged with environmentally safe R-134a
refrigerant and mounted on a sturdy steel, rail-type
base which can be easily removed if freezer conver-
sion is desired. Refrigerators are designed to main-
tain 38 to 40 degrees Fahrenheit (3 to 5 degrees
Centigrade) while operating with an unrestricted air
supply in a maximum ambient temperature of 100
degrees Fahrenheit . All condensate water is evapo-
rated by an automatic non-electric, corrosion-resist-
ant condensate evaporator. A strict quality-assurance
team inspects all materials and components to certify
that each model conforms to the most exacting stan-
dards. All models are factory performance tested for a
minimum of 16 hours prior to crating.
Cabinet Construction
All materials are of top quality, assembled to conform
with strict quality-assurance requirements. The cabi-
net front is constructed of heavy-gauge polished
stainless steel for durability. All cabinet joints and
seams are sealed vapor-tight. Case is of all metal,
welded construction and internally supported and
braced for a rigid unit construction. Cabinet design
eliminates overlapping panels with raw edges.
Cabinet body is insulated with non-CFC, foamed-in-
place polyurethane foam with an average thickness of
3 inches to ensure increased energy efficiency. Full
length louvered air grille located above the doors
allows equal air circulation to the condensing unit.
Easily removable, low wattage, anti-sweat door
heaters concealed by a non-metallic, non-conductive,
high-impact thermal breaker strip eliminate conden-
sate build-up on the cabinet front. Fluorescent lighting
is activated by an easily accessible interior switch.
Cabinets are equipped with 6-inch adjustable stain-
less steel legs.
Shelving
Shelves are designed for heavy-duty use with .306"
diameter frame and brace members and .140" diam-
eter fill wires spaced
3
/
4
" apart. Shelves are welded
steel and epoxy-coated for a durable, long, rust-free
service life. Adjustments are in
1
/
2
" increments and a
wide door opening allows the use of a variety of
optional pan and tray slide types.
Door Construction
Self-closing double-pane, tempered sliding glass is
encased by a heated, heavy-duty aluminum extruded
frame. Doors glide on stainless steel, heavy duty, ball
bearing wheels. Doors are provided with built-in
cylinder lock.
