Continental Motors O-200-D, Инструкция по установке и эксплуатации

Страница: 45 / 112

O-200-D & X Series Engine Installation and Operation Manual 2-23
3 January 2017
Engine Description
2-4. Engine Specifications
Table 2-3. O-200-D Specifications
General
Model O-200-D
FAA Type Certificate E252
Installation Drawing Number 657316
Compression Ratio 8.5:1
Number of Cylinders 4
Firing Order 1-3-2-4
Recommended Time Between Overhaul (TBO) See Section 6-3 in M-0
Bore 4.062 in. 103.17 mm
Stroke 3.875 in. 98.43 mm
Piston Displacement 201 cubic inches 3.29 L
Crankshaft Speed & Brake Horsepower
Rated Maximum Continuous Operation
1
100 BHP -0/+5% @ 2750 RPM
Crankshaft Speed (Maximum rated) 2750 rpm
Engine Idle Speed, Minimum
675-925; application dependent
2
Maximum Recommended Cruise (75% Power)
1
75 bhp @ 2550 rpm
Typical Climb Power (WOT)
1 88 bhp @2450 rpm
Fuel System Specifications
Fuel Minimum Grade
3
100/100LL conforming to ASTM D910
Fuel Grade People’s Republic of China
4
RH 95/130 conforming to GB 1787
Minimum fuel pressure at the carburetor inlet (psi) 0.2
Maximum fuel pressure at carburetor inlet (psi) 6.0
Fuel Flow, maximum, @ 2750 rpm, full throttle, full rich mixture 52-56 lbs/hr.
Fuel Flow versus Horsepower Refer to Figure 2-18
Fuel Consumption
Power Level BHP (kW) lbs./hr (max)
Rated Power, 100% 100 (74.5) 56.0 (Figure 2-18)
Cruise, 75% 75 (55.9) 40.4 (Figure 2-18)
Cruise, 65% 65 (48.4) 40.7 (Figure 2-18)
Cylinder Head Temperature
Maximum Cruise Operational Temperature
5
420°F 215°C
Maximum Allowable Operational Temperature
5
480°F 248°C
Minimum Takeoff Temperature
5
240°F 116°C
Exhaust
Exhaust System back pressure, maximum, measured 1.5 inches from port flange, in Hg
(kPa)
2.0 (6.75)
EGT Thermocouple Probe, minimum distance from port, in. (mm) 2.0/2.50 (50.8/63.5)