Continental Motors O-200-D, Инструкция по установке и эксплуатации, Страница: 109 / 112

O-200-D & X Series Engine Installation and Operation Manual C-1
3 January 2017
Standard Practices
Appendix C.Standard Practices
C-1. Handling Parts
Refer to Appendix C-1 in M-0, Standard Practice Maintenance Manual.
C-2. Replacement Parts
Refer to Appendix C-2 in M-0, Standard Practice Maintenance Manual.
C-2.1. Background
Refer to Appendix C-2.1 in M-0, Standard Practice Maintenance Manual.
C-2.2. Acceptable Replacement Parts
Refer to Appendix C-2.2 in M-0, Standard Practice Maintenance Manual.
C-2.2.1. Know Your Supplier
Refer to Appendix C-2.2.1 in M-0, Standard Practice Maintenance Manual.
C-2.3. 100% Parts Replacement Requirements
Refer to Appendix C-2.3 in M-0, Standard Practice Maintenance Manual.
C-2.4. Mandatory Overhaul Replacement Parts
Refer to Appendix C-2.4 in M-0, Standard Practice Maintenance Manual.
C-2.5. Authorized Oversize/Undersize Parts
Refer to Appendix C-2.5 in M-0, Standard Practice Maintenance Manual.
C-2.6. Engine Data Plate Replacement
Refer to Appendix C-2.6 in M-0, Standard Practice Maintenance Manual.
C-3. Safety Wiring Hardware
Refer to Appendix C-3 in M-0, Standard Practice Maintenance Manual.
C-4. Tab Washer Installation
Refer to Appendix C-4 in M-0, Standard Practice Maintenance Manual.
C-5. Heli-Coil Replacement
Refer to Appendix C-5 in M-0, Standard Practice Maintenance Manual.
C-6. Stud Replacement
Refer to Appendix C-6 in M-0, Standard Practice Maintenance Manual.
C-7. Cotter Pin Installation
Refer to Appendix C-7 in M-0, Standard Practice Maintenance Manual.
C-8. Fuel System Service
Refer to Appendix C-8 in M-0, Standard Practice Maintenance Manual.