CONTINENTAL EDISON CEBDS4022B3, Инструкция пользователя

Страница: 39 / 48

39
3. Free standing installation
You can choose to install your soundbar by placing it on a table.
To make the most of the sound quality of the product, the sound bar should be
installed centrally below your TV, facing the listening position, as shown in the
diagram below.
4. Wall mounting installation
You can choose to hang your sound bar on the wall by mounting it directly under the
TV screen.
Follow the steps below:
1. Place each wall mount bracket in its location at the back of the sound bar, then
screw each bracket using the screws provided.
2. Measure the locations of the two holes in the wall mount bracket and mark two
points on the wall for drilling depending on the measurement. Make sure the holes on
the wall (concrete) are in the correct positions before drilling.
Note: The recommended diameter for the hole is 6mm.
3. After drilling, insert 2 wall plugs (not supplied) into the drilled holes; use a hammer
if necessary.
Do not drill into plasterboard walls, plaster plastered, wooden slats, etc.
4. Insert the 2 screws (supplied) into the holes and tighten them. Make sure to leave
8mm between the screw heads and the wall.
5. Connect the cables to the soundbar.
6. Lift the unit with its wall brackets fixed above the screw heads. Slide it into place.
fix the screws in the holes with dowels. The screws must protrude far enough for
mounting.