Feature
Description
Physical
2.35” [60mm] W x 1.125” [29mm] H x 4.95” [126mm] D (w/bracket)
8 oz [226g]
All aluminum enclosure with durable black powder coat paint
Swivel-mount receiver, attached to any flat surface
Front Panel
IR Sensors:
Internal sensors receive 38 KHz and 57 KHz commands
Automatically detects CR, JVC, Mitsubishi, NEC, Philips RC5, Samsung, Sony, and Tivo
IR codes
IR Receive LED:
Red LED flashes when receiving IR commands
Back Panel
DIP Switch:
Sets RS-232 operation parameters
1 On = Send native RS-232 code, ignore custom commands
2 On = Force 9600 baud rate,8,N,1
Control:
5-pin captive screw terminal
1 DC Power In (same as Power In)
2 IR Signal In (remote IR sensors)
3 RS-232 TX
4 RS-232 RX
5 GND
RS-232:
1,200 to 115,200 baud (9600 default), 8 data bits, no parity, 1 stop bit
Power In:
2.1mm coaxial jack (center conductor positive), 50 mA maximum
11.5 to 24 VDC, 12 VDC typical, 50 mA max (may be unregulated)
Includes
12 VDC power supply, 100 mA (North American shipments only)
IR-232 Software CD includes IR ToolKit software
Options
CC-IRCOM IR-232 Adapter Cable, DB9 male to screw terminal
CC-232 COM cable for programming IR-232
IC-RC IR Remote
IR-RXC External IR Sensor
Compatible with ChannelPlus, Audioplex, and Xantech remote IR sensors
Specifications
Contemporary Research • 17630 Davenport Rd., Suite 113 • Dallas, TX 75252
Phone: 972-931-2728 • Toll Free: 888-972-2728 • Fax: 972-931-2765
System Tools IR-232 NDS 0906 © 2006, specifications subject to change without notice
IR-232
IR ToolKit Software
Warranty
All CR products feature a full
two-year warranty.
IR-232 IR to RS-232 Interface
AV Tools
crwww.com