Contemporary Research Corporation
6
ICW-STA
Installation
AC Power
1.
Insert DC power supply plug into 12 VDC jack on the VDC.
2.
Plug power adaptor into AC wall outlet.
3.
The Net LED should turn on and stay lit (indicates no network communication).
RF Coax and iCW-Net Connection
1.
Connect the RF Coax cable into the Antenna/Cable input on the STA.
2.
Connect the iCW-Net RJ-45 plug into the iCW-Net input on the STA.
3.
If the iCW-Net signal is operating, the Net LED will now blink once per second.
A/V Setup
1.
Connect video and stereo audio outputs of the STA into the video and audio inputs of the projector.
2.
The ICW-STA may be switched to provide mono audio (see SO Mono/Stereo command on page 10), in
mono mode, both audio outputs will provide mono sound.