Contemporary Research Corporation
4
ICW-STA
Specifications
Physical
Size:
8.5" [216mm] wide x 1.75" [38mm] height (1RU) x 6.0" [153mm] deep
Weight:
1.5 lbs [0.68kg]
Enclosure:
All aluminum with durable black powder coat paint
Mounting:
Surface mounting with optional RK2 mounting kit
Front Panel
Push Buttons:
Channel up and down, Volume up and down, and Mute A/V
Indicators:
Mute A/V: Red LED lights when mute is on
Net: Green LED for iCW-Net bus, flashes once per second if active
COM: Yellow LED stays on, flashes when receiving IR data
ERR: Red LED indicates a problem within the VDC
Channel/Mode: 3 digit, 7 segment red LED status display
Rear Panel
Power In:
2.1mm coaxial jack (inside center conductor positive), 350 mA maximum
11.5 to 16.5 VDC, 12 VDC typical (may be unregulated)
North American version includes UL/CSA listed wall power supply
RS-232 Control:
Not operational in this model
iCW-Net
RJ-45 input for iCW-Net connection
IR In:
3.5mm stereo jack for optional IR-RXC IR Receiver
Sleeve= DC power+ from power jack input, limited to less than 100mA
Ring=DC power– (GND)
Tip= IR data signal
Antenna/Cable:
‘F’, female, 75 ohm impedance
External Inputs:
Video - RCA female jack, NTSC composite
Audio – 2 RCA female jacks, unbalanced stereo, 20K ohms impedance
A/V Outputs:
Video - RCA female jack, NTSC composite
Audio – 2 RCA female jacks, unbalanced stereo, 1K ohms impedance
Audio Response:
BTSC Stereo Total Harmonic Distortion (THD): 1% maximum, 0.3% typical
BTSC Stereo Channel Separation: 25dB minimum, 30dB typical
BTSC
Stereo
Response:
50Hz
to
12KHz
Mono Total Harmonic Distortion (THD): 0.5% maximum, 0.1% typical
Mono mode frequency response: 20Hz to 20KHz
Audio Level:
500mV RMS typical output level at max volume
Volume level 0dB to –62dB and mute in 64 steps