Contec RP-COM(FIT)H, Руководство пользователя

Страница: 31 / 49

4. Installation and Connection
26
RP-COM(FIT)H, RP-COM(FIT)H-AF
Connection of a Power Supply
CAUTION
Because the power supply unit generates heat, a minimum spacing of 2 cm should be provided
between the RP-COM(FIT)H, RP-COM(FIT)H-AF and any adjoining units, and care should be
taken so that the ventilation holes are not covered.
RP-COM(FIT)H
< Supplying power from the power supply input connector >
To supply power from the power supply input connector, connect a supported cable from the detachable
connector at the front.
(Supported cable : AWG28 - 16)
If 10 - 30VDC power supply is available in the installation environment, power can be supplied directly.
Alternatively, the optional AC adapter (POA201-10-2) can also be connected to the product.
RP-COM-H
MODE
10 - 30
Vi+
Vi -
FG
RS
-2
32
C
10
/1
00
M
ACT
LINK
VDC
ID 0
2
4
67
9
C E
8
CO M PO WER
0
8
F
7
C
4
B
3 6
E
5
D
A
2
9
1
RP-COM(FIT)H
3 pin power connector
Figure 4.4. Connection of a Power Supply
(using 10 - 30VDC power supply in installation environment)
Figure 4.5. Connection of a Power Supply
(using an optional AC adapter)