Contec PC-HDD/LG Скачать руководство пользователя страница 1

                                                                                                                                                  

1

PC-HDD/LG

2.5 inch IDE Hard Disk Drive

with Legacy-signal

PC-HDD/LG

 

User’s Guide

CONTEC CO.,LTD.

Thank you for purchasing the CONTEC PC-HDD/LG.    Please use
this product in accordance with the procedures described in this
document.

 General Caution

- Do not apply pressing force on the top of cover (See Figure 1. on

page 2).

- Do not cover the breathing hole on the top cover (See Figure 2. on

page 2).

- Do not touch the interface connector pins and the surface of printed

circuit board .

- Hard disk are precision instruments.    Be extremely careful in

handling during and after assembly.

- The drive can be easily damaged by shocks or ESD (Electrical

Static Discharge), so any damages applied to the drive after taking
out from shipping package and opening ESD protective bag are
user’s responsibilities.

- Be sure to turn off the power of the unit when plugging in or

unplugging connectors.

- Use the mounting screws (M3x5 with sw, w : for screwing the base)

provided with the product.    Longer screws may damage the interior
of the product.

- CONTEC bears absolutely no responsibility for use if modified hard

disk.

- This hard disk drive (HDD) has not guaranteed use by continuation

operation and continuation power for 24 hours. When it is used by
continuation operation and continuation power a life fails extremely.
In the case of a 24-hours operation system, use of our company
silicon disk drive (SDD) is recommended.

- The life of a hard disk drive changes with environment or operating

conditions. As a standard, power time (motor-on time) below
250hours/month (below 8 hours/day), disk access time is 20% or
less, it becomes which for 20,000 hours (power time) or five years,
or an early thing.

Содержание PC-HDD/LG









Отзывы: