Contec MC-310B-DC355, Руководство пользователя, Страница: 7 / 33

1. Introduction
2
MC-310B-DC355
Accessories (Option)
Cable & Connector
Flat Cable with Two 37-pin D- SUB Connectors
: PCB37P-1.5 (1.5m)
: PCB37P-3 (3m)
: PCB37P-5 (5m)
Shielded Cable with Two 37-pin D-Type Connectors : PCB37PS-0.5P (0.5m)
: PCB37PS-1.5P (1.5m)
: PCB37PS-3P (3m)
: PCB37PS-5P (5m)
Flat Cable with One 37-pin D-Type Connector : PCA37P-1.5 (1.5m)
: PCA37P-3 (3m)
: PCA37P-5 (5m)
Shielded Cable with One 37-pin D-Type Connector : PCA37PS-0.5P (0.5m)
: PCA37PS-1.5P (1.5m)
: PCA37PS-3P (3m)
: PCA37PS-5P (5m)
D-SUB37P Male Connector Set (5pieses) : CN5-D37M
Terminal Unit / Power Supply
Screw Terminal Unit (M3 x 37P) : EPD-37A *1*2
Screw Terminal Unit (M3.5 x 37P) : EPD-37 *1
General Purpose Terminal (M3 x 37P) : DTP-3C *1
Screw Terminal (M2.5 x 37P) : DTP-4C *1
AC Adapter (Input : 90 - 264VAC, Output : 12VDC 3.75A) : IPC-ACAP12-04L
*1
A PCB37P or PCB37PS optional cable is required separately.
*2 “
Screw upright terminal panel” is used to prevent terminal screws from falling off.
*
Check the CONTEC’s Web site for more information on these options.
How to Use Accessories
For more information on image output, Line out and software setup, visit the resource center
( http://www.contec.co.jp/mc ).