6. About Hardware
GP-IB(PCI)F, GP-IB(PCI)FL, GP-IB(LPCI)F, GP-IB(LPCI)FL
51
6.
About Hardware
T his chapter provides hardware specifications and hardware-related supplementary information.
Hardware specification
T he following tables list the hardware specifications of the board.
GP-IB(PCI)F, GP-IB(LPCI)F
Table 6.1. Spe cification <GP-IB(PCI)F, GP-IB(LPCI)F>
Item
Specifications
GPIB
Number of channel
1ch
Conforms to IEEE-488.1, 488.2(GPIB)standards
Transfer format
8-bit parallel, 3-wire handshake system
Transfer rate
1.5Mbyte/sec
Data buffer size
2Kbyte send, 2Kbyte receive
Signal logic
Negative logic
L level : 0.8V or less,
H level : 2.0V or more
Cable length between
device
4m or less *1
Total cable length
20m or less
Connectable number of
device
15 devices (Max.)
Analyzer buffer size
64K data points (1 data point: Control s
DIO1 to 8)
Bus master section
DMA channels
2ch
Transfer bus width
32-bit
Transfer data length
8 PCI Words length (Max.)
Transfer rate
80Mbyte/sec
Scatter/Gather function 64Mbyte/ch
Common section
I/O address
Any 128-byte boundary
Interrupt
1 level use
Consumed current
5VDC 400mA (Max.)
Operating conditions
0 - 50°C, 10 - 90%RH (No condensation)
PCI bus specification
32-bit, 33MHz, Universal key shapes supported *2
External
dimensions(mm)
121.69(L) x 63.41(H)
Weight
110g
*1
For details, see item (2) in Chapter3, "Connecting Cables".
*2
This board requires power supply at +5 V from an expansion slot (it does no t work on a m achine with a +3.3 V power supply alone).
[mm]
121.69(L)
63
.4
1(
H
)
<GP-IB(PCI)F>
<GP-IB(LPCI)F>
[mm]
121.69(L)
63
.4
1(
H
)
The standard outside dimension (L) is
the distance from the end of the board
to the outer surface of the slot cover.
