Ver.1.00
FPD-M21VT-AC, FPD-L21ST-AC, FPD-H21XT-AC
1
FLAT PANEL DISPLAY
Aluminum-Face Type
FPD-x21xT-AC
Series
*
Specifications, color and design of the products are subject to
change without notice.
Model
Screen size
Number of pixels
Number of colors
FPD-H21XT-AC
15
inches
1024 x 768
dots 16,777,216
colors
FPD-L21ST-AC
12.1
inches
800 x 600
dots 262,144
colors
FPD-M21VT-AC
10.4
inches
640 x 480
dots 262,144
colors
These products are panel-mounted, analog RGB input type flat
panel display for use with host computers such as the CONTEC
IPC series and SBCs (single board computers).
These products use a high-intensity LCD with a wide viewing
field and touch panel operation via either RS-232C or USB.
They also feature an auto-scaling function and on-screen
display setup screen and front face with IP65-compliant ingress
protection.
As panel mounting is compatible with the existing IPC-DT/x6x
series, users can easily transit the system from the existing
system.
*
For more details on the host computer and option of this product, please contact your
retailer.
- Standard analog RGB input for screen. RS-232C and USB
interfaces for touch panel
Supports standard analog RGB input and touch panel operation
via either RS-232C or USB. The LCD is high-intensity with a
wide field of view and can display either 16,777,216 colors (15
inch model) or 262,144 colors (10.4 inch and 12.1 inch models).
The front on the display is made from lightweight aluminum.
The display features an analog touch panel that can emulate
mouse operation via the driver software.
- Auto-scaling feature that resizes the input screen to the
LCD dot configuration
Auto-scaling feature that resizes the input screen to the LCD
dot configuration
- On-screen display setup menu facilitating screen
adjustment
The on-screen display setup screen can be used to set
parameters such as the brightness, contrast, and display
position adjustment.
- Front structure with IP65-compliant ingress protection
Front structure with IP65-compliant ingress protection
- Panel attachment dimensions are compatible with the
IPC-DT/x6x series.
The compatibility of the panel attachment fitting with the
previous IPC-DT/x6x model facilitates replacement.
- USB multiple touch panel
This function can be used in the case when the RGB signal
from the host computer is split for connecting to multiple
displays via a splitter. The function permits touch panel
operation to be used at all the displays. A maximum of eight
touch panel displays can be connected
- Input connector allows the backlight to be switched on or
off externally.
The unit features an input connector that allows the backlight to
be switched on or off externally.
Function Specifications
Specification
Item
FPD-M21VT-AC FPD-L21ST-AC FPD-H21XT-AC
Screen
Assembly type
Panel mounted
Screen size
10.4 inches
12.1 inches
15 inches
Number of pixels
640 x 480 dots
800 x 600 dots
1024 x 768 dots
Display type
TFT Color LCD
Number of colors
262,144 colors
262,144 colors
16,777,216 colors
Screen adjustment
Automatic adjustment (display positioning and scaling) and
manual adjustment using the front switches
Brightness control
Adjustment using the front switch or software control from the
host computer
Backlight control
Can be turned ON/OFF by front panel switch, software control
from host computer, or rear connector input.
Display interface
Analog RGB input HD-SUB 15 pin (Female) connector
Cable length which
recommends
5m or less *1
Image signal
Separate RGB, analog, positive polarity 0.7Vp-p/75
Ω
Sync signal
Separate V/H, TTL, positive/negative polarity
Horizontal
scan frequency
31 - 38kHz
31 - 48kHz
31 - 60kHz
Incoming
signal
specification
Vertical scan
frequency
60 - 72Hz
56 - 72Hz
56 - 75Hz
Touch panel
Resolution
4096 x 4096
Detection method
Resistive-layer analog method
Touch life expectancy
One million repeated touches
(as tested by mechanical touching under 300g of force at a rate
of two presses per second)
Touch panel interface
Connect to the host computer using either USB *2 or RS-232C.
USB: USB1.1-compliant, TypeB Connector
RS-232C: 9pin D-SUB (Male) Connector
Touch panel driver
(option)
For Windows: IPC-SLIB-01
Power supply input part
Power supply connector
3-pin terminal for AC power supply
Input power supply voltage
85 - 132VAC/170 - 265VAC(47 - 63Hz) Input automatic
operation switch
Consumption
current 32VA(Max.) 35VA(Max.) 40VA(Max.)
Consumption current
(power save mode)
14VA (Max.)
*1 Using a cable longer than 5 m may reduce the image quality. The cable should be as short
as possible as degradation. in image quality may result even when the cable is 5 m or
shorter depending on the type of host computer or cable.
*2 The touch panel USB interface is only supported on Windows XP/2000/98SE.
Specification
Features
