Contec DIO-32DM3-PE Скачать руководство пользователя страница 8

Страница: 8 / 63

1. Before Using the Product

DIO-32DM3-PE

Before Using the Product

This chapter provides information you should know before using the product.

About the Board

This product is a PCI Express bus-compliant interface board that supports transfer by bus mastering and

performs input/output between the external device and digital signal. This product features unisolated

LVTTL level (Operating voltage : 3.3V) I/O 32channels and you can select input / output in 16 units.

Bus master transfer makes it possible to sample quickly large data with transfer rate at 50MHz

maximum. It can be used as a pattern generator that outputs arbitrary digital patterns at high speed.

It can also be used as a general-purpose I/O board when bus mastering is not used.

Windows driver is bundled with this product.

Using the dedicated library VI-DAQ makes it possible to create each application for LabVIEW.

Features

32channels of unisolated LVTTL level I/O (32 input channels / each 16channels for I/O / 32 output

channels are selected.)

This product has the 32channels (operating voltage 3.3VDC, positive logic) of unisolated LVTTL level

I/O whose response speed is 20nsec. They can be used for 32bit input, 16bit input plus 16bit output, or

for 32bit output.

Other than I/O bit, this product has the control signal (clock, start, stop and handshake signal (REQ,

ACK) that can control starting and stopping the sampling (input) / generating (output)).

- Sampling and generating with transfer rate at 50MHz maximum

Bus master transfer makes it possible to sample (input) or generate (output) large data with transfer rate

at 50MHz maximum. As the sampling and generating features have their own bus mastering blocks

each made up of two independent channels, the board can generate 16 signals while sampling 16

signals.

- A synchronization control connector is provided for synchronized control of multiple boards.

A synchronization control connector is provided for synchronized control of up to 16 boards. It is also

easy to synchronize operation with other CONTEC boards that have a synchronization control

connector.

- You can use Max. 4 input signals as interrupt request signals at the time of using the general-purpose

I/O.

You can use Max. 4 input signals as interrupt request signals and also disable or enable the interrupt in

bit units at the time of using the general-purpose I/O.

- Windows compatible driver libraries are attached.

Using the attached driver library API-PAC(W32) makes it possible to create applications of Windows.

In addition, a diagnostic program by which the operations of hardware can be checked is provided.

Содержание DIO-32DM3-PE
































































Результаты поиска

Содержание DIO-32DM3-PE

Отзывы:

Похожие инструкции для DIO-32DM3-PE

Бренды по названию

Популярные бренды

Contec DIO-32DM3-PE, Руководство пользователя

Результаты поиска

Содержание DIO-32DM3-PE

Отзывы:

Похожие инструкции для DIO-32DM3-PE

Бренды по названию

Популярные бренды