Contec CPS-MG341G-ADSC1-930, Справочное руководство

Страница: 24 / 93

—
Product Nomenclature and Function
—
CPS-MG341G-ADSC1-930 Reference Manual (Hardware)
— 24 —
1. Nomenclature of Product Components
Component names of the product are shown in the figure below.
No. Name Function
1 Power Connector This is a connector for power. Use the 3-pin connector included in
the package.
2 Antenna Connector This is a connector to connect an antenna. Use the supplied
connector or optional one.
3 SIM Card Slot This is a slot for inserting SIM card.
4 3G LED This displays the intensity of the signal reception.
5 Debug Connector Do not use this.
6 SD Card Slot This a slot for inserting SD card to store data.
7 USB Port This is a TYPE-A USB port.
8 RS-232C Serial Port This is a RS-232C serial port. (male)
9 LED Indicator This indicates status of the product.
10 Reset Switch This resets the product.
11 Shut-Down Switch This shuts down the product.
12 DIP Switch This is used for system setup and RS-422A/485 setup.
13 LAN Port This is a connector for LAN.
14 Digital Input/Counter
Input/Digital Output
Connector
This is a connector for digital input/counter input/digital output.
(Use the 10-pin connector included in the package)
15 Analog Input Connector This is a connector for analog input.
(Use the 3-pin connector included in the package)
RE
SE
T
SW
1
SD
Iso late d R S - 42 2A /48 5
SH
UT
C OM B USB RS - 232 C
T
E
R
M
MO
D
E
SW
2 DO
W
N
COM A AI1 AI0 DO1 DO0 DI/CNT LAN B LAN A
12-24VDC
3 1 2 4 5 6 7 8
9