Contec CPS-MG341G-ADSC1-930, Справочное руководство

Страница: 11 / 93

—
Introduction
—
CPS-MG341G-ADSC1-930 Reference Manual (Hardware)
— 11 —

Decrease malfunctions or damages by bus isolation and
surge protection. (the RS-422A/485, digital/counter
input)
Electrical isolation between the RS-422A/485 and the CPU, as well as between the digital/counter input and CPU can block electrical
noise flow.
Moreover, the surge protection elements are used for signal line and on top of that, the RS-422A/485 is protected with the
communication IC that can withstand ±70 V input voltage, which reduces malfunctions or damages by surge.

Decrease malfunctions or damages by bus isolation,
inter-channel isolation and surge protection. (Analog
input)
As analog inputs and channel, along with analog inputs and CPU, are electrically isolated, connecting an input signal with different grand
level to each channel is possible. In addition, the surge protection elements are used for signal lines, which reduces malfunctions or
damages by surge
.

Equipped with LED for an operation check
The product has LED for an operation check, which helps you visually confirm the communication status of each interface.

No electrolytic capacitor
No electrolytic capacitor is used. The Contec is creating the product with a longer life.
2. Software Features

OPC UA Server function within
OPC UA (Unified Architecture) is an advanced protocol of OPC specifications, which presents refined capability of communicating with
higher-order system in addition to transferring and receiving data of devices or plants. OPC UA is a TCP-based platform independent
protocol. This product can be operated with HMI and SCADA software that support OPC UA clients from various makers.

Promoting a multi-vendor system that supports a
varied lineup of PLCs and Modbus devices
The product connects and supports every PLC and each Modbus device simultaneously. *Visit our website regarding the details of
supportive information.

Connect up to 10 links and collect data from 100 group
registers
Up to 10 Ethernet/calculating links can be connected. Data collection from 30 PLCs and 100 group registers can be carried out.
Up to 1000 data mapping for Modbus is possible.