Contec CONPROSYS nano CPSN-PCB271-S1-041 Скачать руководство пользователя страница 12

Страница: 12 / 155

—

Safety Precautions

—

CPSN-PCB271-S1-041 Reference Manual (Software)

—

Safety Information

This document provides safety information using the following symbols to prevent accidents
resulting in injury or death and the destruction of equipment and resources.
Understand the meanings of these labels to operate the equipment safely.

DANGER

DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.

WARNING

WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury or in property damage.

Содержание CONPROSYS nano CPSN-PCB271-S1-041




























































































































































Результаты поиска

Содержание CONPROSYS nano CPSN-PCB271-S1-041

Отзывы:

Contec CONPROSYS nano CPSN-PCB271-S1-041, Справочное руководство, Страница: 12 / 155

Результаты поиска

Содержание CONPROSYS nano CPSN-PCB271-S1-041

Отзывы: