—
Installation
—
CPS- MM-LC Reference Manual (Hardware)
—
23
—
2.
Setting the Configurable Type Module
CAUTION
If the modules set side-by side are disconnected during the operation, it can cause damage to
the product. Set the controller on DIN rail in order to avoid the trouble.
Always confirm the PWR-LED is turned off before setting or removing the modules
Always check the module is firmly fixed on DIN rail with hooks when setting the product.
How to Set
1
First, slide the attached end cover to remove it from the product that is mounted on the DIN
Rail.
2
Unlock the hooks of the module.
If the hooks are stuck, use a slotted screwdriver to unlock.
