Contec bx200 SERIES, Руководство пользователя

Страница: 42 / 115

4. Each Component Function
BX-2x0-DCxxxx, BX-2x0D-DCxxxx User’s manual
35
CF Card Connector (Primary IDE Connection) : CF1 - 2
The CF Card (Type I : dedicated to the memory card) can be connected.
The CF card connector doesn't support hot plug. The pulling out opening of the CF card cannot be done in
the state of power supply ON. Please neither pulling out opening of CF in the state of power supply ON
of this product nor come in contact with CF. This product may malfunction or cause a failure.
Before you insert/remove the CF card, make sure that the power is switched off and the access LED is
turned off.
Table 4.11. CF Card Connector
Connector type 50-socket header type (1.27mm pitch)
50
25
26
1
Pin No. Signal name Direction Pin No. Signal name Direction
1 GND 26 GND
2 DD3 I/O 27 DD11 I/O
3 DD4 I/O 28 DD12 I/O
4 DD5 I/O 29 DD13 I/O
5 DD6 I/O 30 DD14 I/O
6 DD7 I/O 31 DD15 I/O
7 CS0- Output 32 CD3- Output
8 GND 33 GND
9 GND 34 DIOR- Output
10 GND 35 DIOW- Output
11 GND 36 +3.3V
12 GND 37 INTRQ Input
13 +3.3V 38 +3.3V
14 GND 39 CSEL- Output
15 GND 40 N.C
16 GND 41 RESET- Output
17 GND 42 IOCHRDY Input
18 DA2 Output 43 DDRQ Input
19 DA1 Output 44 DDACK- Output
20 DA0 Output 45 DACT- Output
21 DD0 I/O 46 PDIAG- Output
22 DD1 I/O 47 DD8 I/O
23 DD2 I/O 48 DD9 I/O
24 N.C 49 DD10 I/O
25 GND 50 GND