3. Hardware Setup
14
BX-2x0-DCxxxx,
BX-2x0D-DCxxxx
User’s
manual
Hardware Setup
-
Before you start, be sure that the power is turned off.
-
Remove only those screws that are explained. Do not move any other screw.
Inserting an Embedded CF Card
One CF card (Type I) can be embedded. BX-2x0-DCx311 and BX-2x0D-DCx311 come with CF cards
with the OS already installed.
(1) Detach the side panel and insert the CF card.
(2) Reattach the side panel and tighten the screws to secure it.
The specified tightening torque is 5 - 6 kgf·cm.
Figure 3.1.
Inserting an Embedded CF Card
Attaching the CF Attachment Fittings
(1) After inserting a CF Card, fasten the bundled CF attachment fittings with a screw.
Figure 3.2. Attaching the CF Attachment Fittings
CAUTION
-
Insert the CF Card face up.
-
Screw holes may be damaged if screws are tightened with a torque greater than the specified
torque.The specified tightening torque is 5 - 6 kgf
⋅
cm.
Содержание bx200 SERIES
