Contec AO-1608L-LPE Скачать руководство пользователя страница 9

Страница: 9 / 77

1. Before Using the Product

AO-1616L-LPE, AO-1608L-LPE

- Functions and connectors are compatible with PCI compatible board DA16-16(LPCI)L, DA16-

8(LPCI)L

AO-1616L-LPE : The functions same with PCI compatible board DA16-16(LPCI)L are provided.

AO-1608L-LPE : The functions same with PCI compatible board DA16-8(LPCI)L are provided.

In addition, as there is compatibility in terms of connector shape and pin assignments, it is easy to

migrate from the existing system.

- Support for both of low-profile and standard PCI slots (interchangeable with a bundled bracket)

This product has each bracket for both low-profile size slot and standard size slot. If you wish to
mount this product in a standard size slot, replace this with the standard size bracket.

- Software-based calibration function

Calibration of analog output can be all performed by software. Apart from the adjustment information

prepared before shipment, additional adjustment information can be stored according to the use

environment.

- Windows/Linux compatible driver libraries are attached.

Using the attached driver library API-PAC(W32) makes it possible to create applications of

Window/Linux. In addition, a diagnostic program by which the operations of hardware can be
checked is provided.

- MATLAB and LabVIEW is supported by a plug-in of dedicated library VI-DAQ.

Using the dedicated library MATLAB and VI-DAQ makes it possible to make a LabVIEW

application.

Support Software

You should use CONTEC support software according to your purpose and development environment.

Windows version of analog I/O driver

API-AIO(WDM)

[Stored on the bundled CD-ROM driver library API-PAC(W32)]

The API-AIO(WDM) is the Windows version driver library software that provides products in the form of Win32

API functions (DLL). Various sample programs such as Visual Basic and Visual C++, etc and diagnostic program

*1useful for checking operation is provided.

For more details on the supported OS, applicable language and new information, please visit the CONTEC’s Web

site.

Содержание AO-1608L-LPE














































































Результаты поиска

Содержание AO-1608L-LPE

Отзывы:

Похожие инструкции для AO-1608L-LPE

Бренды по названию

Популярные бренды

Contec AO-1608L-LPE, Руководство пользователя

Результаты поиска

Содержание AO-1608L-LPE

Отзывы:

Похожие инструкции для AO-1608L-LPE

Бренды по названию

Популярные бренды