Contec AO-1604CI2-PCI, Руководство пользователя

Страница: 41 / 85

2. Setup
34
AO-1604CI2-PCI
Setup Troubleshooting
Symptoms and Actions
The board cannot be initialized. [Windows NT 4.0]
The driver may not yet be activated. When your PC is running under Windows NT 4.0, set the PnP OS
option in the BIOS Setup menu to “NO”.
For details on BIOS settings, refer to the user’s guide for your PC.
The board cannot output data normally
- Run the Diagnosis Program to check whether the board has been registered correctly and whether
any initialization error has occurred.
- Check the settings and connections of the board. Also check the output ranges.
The board works with the Diagnosis Program but not with an application.
The Diagnosis Program is coded with API-TOOL functions. As long as the board operates with the
Diagnosis Program, it is to operate with other applications as well. In such cases, review your program
while paying attention to the following points:
- Check the return values of functions.
- Check the Driver No. and Board No.
The OS won't normally get started or detect the board.
[Windows Vista, Windows XP, Server 2003, 2000]
Turn off the power to your PC, then unplug the board. Restart the OS and delete the board settings of
API-TOOL Configuration. Turn off the PC again, plug the board, and restart the OS. Let the OS detect
the board and use API-TOOL Configuration to register board settings.
If your problem cannot be resolved
Contact your retailer.