Contec AI-1204Z-PE, Справочное руководство, Страница: 25 / 85

—
Setup
—
AI-1204Z-PE Reference Manual
— 25 —
4. Hardware installation
Under Windows, the peripherals need to be recognized by the OS. This is called hardware installation.
When using multiple products, install one product at a time. Complete the setup of the
product before starting to install the next one.
1. Plugging the Board
1
Before plugging the board, shut down the system, unplug the power code of your PC.
2
Remove the cover from the PC so that the board can be mounted.
3
Plug the board into an expansion slot.
4
Put the cover back into place.
CAUTION

Do not touch the board's metal plated terminals (edge connector) with your hands.
Otherwise, the board may malfunction, overheat, or cause a failure.
If the terminals are touched by someone's hands, clean the terminals with industrial alcohol.

Do not install or remove the board to or from the slot while the computer's power is turned on.
Otherwise, the board may malfunction, overheat, or cause a failure.
Doing so could cause trouble. Be sure that the personal computer or the I/O expansion unit
power is turned off.

Make sure that your PC or expansion unit can supply ample power to all the boards installed.
Insufficiently energized boards could malfunction, overheat, or cause a failure.