Contec AD16-64(LPCI)LA Скачать руководство пользователя страница 74 | Manualshive

Страница: 74 / 83

Contec AD16-64(LPCI)LA Скачать руководство пользователя страница 74

5. About Software

AD16-64(LPCI)LA

67

About Software for Linux

The Linux version of digital I/O function driver, API-DIO(LNX), provides functions that execute the
following features:

-

Analog I/O of specified channels

-

It is possible to operate as a set parameter to the analog I/O board is preserved by the default value,
and the setting of the parameter doesn't exist.

For details, refer to the help file. The help file provides various items of information such as “Function

Reference”, “Sample Programs”, and “FAQs”. Use them for program development and
troubleshooting.

Driver Software Install Procedure

The Linux version for analog I/O driver, API-AIO(LNX), is supplied as a compressed file
/linux/aio/caioXXX.tgz on the bundled disk. (Note: XXX represents the driver version.)

Mount the bundled disk as shown below, copy the file to an arbitrary directory, and decompress the file
to install the driver.

For details on using the driver, refer to readme.txt and the help file in HTML format extracted by
installation.

To install the driver, log in as a superuser.

Decompression and setup procedure

# cd

# mount /dev/cdrom /mnt/cdrom

Mount the bundled disk.

# cp /mnt/cdrom/linux/aio/caioXXX.tgz ./

Copy the compressed file.

# tar xvfz caioXXX.tgz

Decompress the compressed

file.

................

# cd contec/caio

# make

Compile the file.

................

# make install

Install.

................

# cd config

# ./config

Set up the board to be used.

..... Set as follows.........

# ./contec_aio_start.sh

Start the driver.

# cd

«
...
72
73
74
75
76
...
»

Содержание AD16-64(LPCI)LA




















































































Отзывы:

Нет отзывов