en
Basic settings
32
Programme Food
Cookware
Weight range
in kg
Information
P06
Potatoes
With lid
0.15–1.00
¡
For boiled potatoes, cut fresh potatoes into small,
equally sized pieces.
¡
Add one tablespoon of water and a little salt for every
100 g boiled potatoes.
P07
Vegetables
With lid
0.15–1.00
¡
Weigh fresh, washed vegetables scales.
¡
Cut the vegetables into small, uniform pieces.
¡
Add one tablespoon of water for every 100 g boiled
potatoes.
Cooking food with the automatic programmes
1.
Weigh the food.
You require the weight in order to set the pro-
gramme.
2.
Place the food on microwave-safe cookware and
cover with a lid.
3.
Add the volume of water in accordance with the
manufacturer's instructions on the packaging.
4.
Once the programme has finished, stir the food
again.
5.
The food should be left to stand for an additional 5
to 10 minutes until it reaches a uniform temperature.
The cooking results are dependent on the food
quality and consistency of the food.
9 Basic settings
You can configure the basic settings for your appliance to meet your needs.
9.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Setting
Selection Meaning
Button tone
¡
1
¡
Switch the button tone on and off.
Note:
The button tone remains active for and .
Demo mode
Activate or deactivate demo mode.
Note:
The appliance is switched off. You can use the buttons and the display; the but-
tons do not work. Demo mode is mainly useful for dealers.
1
Factory setting (may vary according to model)
9.2 Changing basic settings
Requirement:
The appliance is switched off.
1.
Press and hold and for a few seconds.
a
The display shows the first basic setting.
2.
Press .
a
The current value flashes on the display.
3.
Use the settings area to set the required value.
4.
To accept the basic setting, press .
5.
To exit the basic setting, press .
6.
Use the settings area to switch to the basic setting
.
7.
To edit the basic setting, press .
a
The selected setting lights up on the display.
8.
Use the settings area to set the required value.
9.
To accept the basic setting, press .
10.
To exit the basic setting, press .
11.
To exit the basic settings menu, press again.
Tip:
The setting can be changed at any time.
9.3 Changing the signal duration
When your appliance is switched off, you hear an aud-
ible signal. You can change the duration of the signal.
▶
Press and hold for approx. six seconds.
a
The signal duration switches between short and
long.
a
The appliance applies the signal duration and dis-
plays the time.
9.4 Setting the time
Note:
After connecting the appliance to the power or
following a power cut, a signal sounds and several
zeros are shown on the display. It may take a few
seconds until a signal sounds and you can set the
time.
Requirements
¡
An audible signal sounds.
¡
12:00 is shown on the display.
¡
The indicator light lights up via .
1.
Set the time via the settings area.
2.
Press .
