CONSTRUCTA CA4.03 Series, Инструкция по эксплуатации

Страница: 21 / 48

21
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Š
.
Limitations on use
Induction hotplates (1 and 4) include this function, see
diagram. The Powerboost function is available provided that the
other induction hotplate is not turned on. If this is not the case,
the
›
and
Š
symbols will flash on the selected hotplate display;
then the power level will be automatically set to
Š
.
To activate
1.
Select the power level
Š
.
2.
Press the + symbol. On the hotplate, the
›
indicator will
appear. You have now activated the function
To switch off the hotplate
Press the
-
symbol. The
›
indicator is no longer displayed and
the hotplate returns to power level
Š
. The Powerboost function
has been deactivated.
Note:
In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
”
and
‰
flash alternately.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator Function
™‚
Childproof lock
‹
Deactivated.*
‚
Activated.
™ƒ
Sound signals
‹
Confirmation beep and error signal deactivated.
‚
Only confirmation beep deactivated.
ƒ
All signals activated.*
™ˆ
Power-Management function
‹
= Deactivated.*
‚
= 1,000 W. minimum power.
‚
= 1,500 W.
ƒ
= 2,000 W.
etc.
Š
or
Š
. = maximum power of the hob.
™‹
Return to basic settings
‹
Personal settings.*
‚
Return to factory settings.
*Factory settings