Consilium SRT, Техническое руководство

Страница: 45 / 120

SRT X-BAND RADAR SYSTEMS
OPERATION
304202P003 2.6 Rev. C
6 NOISE DIODE CURRENT
(³) Increment or decrement to apply ( range ±7). (NEVER SEND 0)
(°) If “A” with pot id, adjust only the correspondent Pot. (not yet).
If “A” without pot id (,,), adjust all the auto adjustable (Tune offset for now).
Sentence should be sent under operator request only. Application of value is immediate but
storage of this one (not volatile memory) will take place after 20 seconds from last change i.e.
from last DPC sentence reception.
2.4.3
DATA TRANSMISSION FROM TXRX TO RDC
2.4.3.1
STATUS SENTENCE 2
$PST2,x,a,aa,aaa,a,a,a,a,a,hh,a,a,,a*hh<CR><LF
│ │ │ │ │ │ │ │ │ │ │ │││
│ │ │ │ │ │ │ │ │ │ │ ││└─ Protocol Version (Starting from A)
│ │ │ │ │ │ │ │ │ │ │ │└─ Empty Field
│ │ │ │ │ │ │ │ │ │ │ └─ MGN Heater:
W = warm, C = cold else NULL (N.A.)
│ │ │ │ │ │ │ │ │ │ └─ A = Automatic Tuning ON else NULL (OFF)
│ │ │ │ │ │ │ │ │ └─ Manual Tuning Adjust. If Automatic NULL (Don't care)
│ │ │ │ │ │ │ │ └─ P = Performance Monitor Available else NULL (N.A.)
│ │ │ │ │ │ │ └─ S = Service Mode A = Auto Adjust. else NULL (OFF)
│ │ │ │ │ │ └─ W = Warm Up, R = Ready
│ │ │ │ │ └─ X = X-Band , S = S-Band Transceiver
│ │ │ │ └─ J = Jitter ON else NULL (OFF)
│ │ │ └─ Rxx = Antenna Rotating ON with xx RPM ( 01 ÷ 60) else NULL (OFF)
│ │ └─ Transceiver status (³)
│ └─ M = Acknowledge Master, S = Slave (²)
└─ Transceiver Number (¹)
Notes:
(¹)
Transceiver Number: 1, 2, 3, 4 (NULL in stand alone TXRX)
(²)
Master/Slave acknowledge (NULL in stand alone TXRX)
(³)
Transceiver status:
Field type Field Descriptions
SB
Stand By
SH Short pulse, High frequency
SM
Short pulse, Medium frequency
SL Short pulse, Low frequency
MM Medium pulse, Medium frequency
ML Medium pulse, Low frequency
LL Long pulse, Low frequency
2.4.3.2
DATA SENTENCE
$PDAT,hh,hh,hh,xxx,xx,xxx,x*hh<CR><LF>
│ │ │ │ │ │ │