Conservator VDF200 Series, Руководство пользователя

Страница: 11 / 16

49-4000062 Rev 0
11
CARE
AND CLEANING
Care and cleaning
Control Panel
To clean the control panel, use a lightly dampened cloth.
Then dry thoroughly.
Dishwasher Interior
To clean and de-odorize your dishwasher, use citric acid
or
Finish
®
Dishwasher Cleaner , a detergent additive.
Finish
®
Dishwasher Cleaner will break up mineral
deposits, and remove hard water film and stains.
You can order citric acid GE Appliances kit # WD35X151
through GE Appliances Parts by calling 877.959.8688
or visiting
GEApplianceparts.com . You can purchase
Finish
®
Dishwasher Cleaner at your local grocery
store.
Stainless Steel Inner Door and Tub
The stainless steel used to make the dishwasher tub and
inner door provides the highest reliability available in a
GE Appliances dishwasher. If the dishwasher tub or inner door should be scratched
or dented during normal use, they will not rust or
corrode. These surface blemishes will not affect their
function or durability.
Exterior Door Panel
Use a clean, soft, lightly dampened cloth, then dry
thoroughly.
Do not use scouring pads or powered cleaners because
these products can scratch the finish. Stainless Steel Door Panel
For cleaning rust and tarnish,
cleaners with oxalic acid
such as Bar Keepers Friend Soft Cleanser™ will remove
rust, tarnish and small blemishes. Use only a liquid
cleanser free of grit and rub in the direction of the brush
lines with a damp soft sponge. Do not use appliance wax
or polish on the stainless steel.
For other blemishes and marks, use Stainless Steel
Magic or a similar product using a clean soft cloth. Do not
use appliance wax, polish, bleach or products containing
chlorine on Stainless Steel. You can order Stainless
Steel Magic # WX10X29 through GE Appliances Parts
by calling 877.959.8688.
Protect Against Freezing
If your dishwasher is left in an unheated place during the
winter, ask a service technician to:
1 Turn off electrical power to the dishwasher. Remove
fuses or trip circuit breaker.
2 Turn off the water supply and disconnect the water inlet
line from the water valve.
3 Drain water from the water inlet line and water valve.
(Use a pan to catch the water.)
4 Reconnect the water inlet line to
the water valve.
5 Remove the plastic sump cover
in the tub bottom and use a
sponge to soak up water in the
rubber boot.
Does Your Dishwasher Have an Air Gap?
An air gap protects your dishwasher
against water backing up into it if a drain
clogs. The air gap is not a part of the
dishwasher. It is not covered by your
warranty. Not all plumbing codes require
air gaps, so you may not have one. The air gap is easy to clean.
1
Turn off the dishwasher and lift off the air gap cover.
2
Remove the plastic cap under the cover and clean with a
toothpick.
3
Replace the cap and cover when the air gap is clean.
Check the air gap any
time your dishwasher
isn’t draining well.
Air gap
Sump cover screws
PRELIMINARY
Y
can order citric ac can order citric
hrough GE Applian hrough GE Applian
or visiting or visiting GEAp GEA
Finish nish
® ®
Dishw Dishw
store.
A
b b
asher tub and tub a
available in a available in a
If
95 9
MI
zing zing
in an unheated pla n an unheated pla
hnician to: ician t
cal power to the d cal power to the d
circuit breaker circuit br .
the water supply an the water supply an
om the water valve m the water valve
rain water from the rain water from the
(Use a pan to catc (Use a pan to catc
PR
Does Your Does Yo
An air gap An air gap
against w
aga
clogs
clogs
DRAFT
ND C
D C
T
D
h oxalic acid oxalic aci
r™ will remove ill remo
only a liquid only a liquid
rection of the brus tion of the brus
o not use appliance e appliance
marks, marks use Stainle use Stainle
ct using a clean sof g a clean sof
lish, bleach or prod lish, bleach or pr
s Steel s Ste . You can o You can o
X29 through G X29 through