DX-1S DIGITAL PABX - MFC98 Manual
7-2
7.2
CALL INFORMATION DISPLAY FIELD UNDER DOS MANAGEMENT MODE
The Call Information Display Field in the bottom of screen shows the call information of the console
telephone, such as incoming call identification. This helps operator to avoid missing important call
information.
7.3
VIEW / PRINT / SAVE ON SCREEN INFORMATION
In DOS Management Mode, operations are performing in an interactive way. Just like the MS-DOS
environment – user enters a command, and then system displays the respond on screen. The display will
scroll up when it reach the bottom of the screen. On the other hand, user can use the arrow keys on MFC98
keyboard to scroll back to the previous display.
When system displays some messages or information on the screen, some of those could be printed or
saved to file for future reference, such as feature setting for extension data, programming data, system
configuration and diagnostic result etc.. You can enable the printing or saving function before the message
displayed. The console will start to output the messages on the screen to printer or file.
Operation
Print Screen Information
1.
If you want to print the message, right clicks the screen and selects “Printer” or press “Ctrl-P” in DOS
Management Mode.
2.
Select printer and options for print out in the standard Print window.
3.
After click “OK” in the Print window,
4.
From now on, information displayed will print on the selected printer.
5.
Right clicks the screen again to disable the print out function.
Save Information to File
1.
If you want to save the message, right clicks the screen and selects “Save as” or presses “Ctrl-S” in
DOS Management Mode.
2.
Enter filename while prompt to.
3.
From now on, information displayed will save to the file.
4.
Right clicks the screen again and selects “Stop Saving” or presses “Ctrl-S” to end save information to
file.
7.4
THREE FUNCTIONS UNDER DOS MANAGEMENT MODE
There are three functions under Management Mode:
Function
Description
Feature Setting for Extension
The attendant operator can set the features for
any extension in Management Mode, such as
Setting Call Forwarding for Extension, Wake Up
Service and Message Waiting etc.
Enter DOS Programming Mode
The DOS Programming Mode is an operation
mode under Management Mode. Keying in the
Programming Mode Password in Management
Mode can enter the Programming Mode.
Enter DOS Diagnostic Mode
The DOS Diagnostic Mode is another operation
mode under Management Mode. Keying in the
Diagnostic Mode Password in Management
Mode can enter the DOS Diagnostic Mode.
Table 7-1 FUNCTIONS UNDER DOS MANAGEMENT MODE
