Wireless LAN Access Point Configuration
10
3.2
Configuring the Access Point
3.2.1
Status and Information
On this screen, you can see the general information of the Access Point including
Alias Name, Firmware Version, ESSID, Channel Number, Status, IP Address, MAC
Address, etc.
3.2.2
Wireless Setting
This Access Point supports AP, Bridge and WDS modes. “AP Bridge Mode”
provides the function to bridge more than 2 wired Ethernet networks together by
wireless LAN. You can use two access points with “AP Bridge-Point to Point mode”
to bridge two wired Ethernet networks together. If you want to bridge more than two
wired Ethernet networks together, you have to use enough access points with “AP
Bridge-Point to Multi-Point mode”. An access point with “AP Bridge-Point to Point
mode” or “AP Bridge-Point to Multi-Point mode” can only be used to bridge wired
Ethernet networks together. It can’t accept connection from other wireless station at
the same time. If you want an access point to bridge wired Ethernet network and
