Sprocket Carrier for NVIDIA® Jetson™ TX2/TX2i/TX1
Users Guide
Document: CTIM-00152
Revision: 0.10
Page 6 of 22
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2019/04/01
Introduction
Connect Tech’s Sprocket Carrier for NVIDIA® Jetson™ TX2/TX2i/TX1 is designed to match the NVIDIA
Jetson module form factor. The Sprocket’s design includes 1x USB OTG, 1 x4 lane MIPI CSI-2, 2x 3.3V
UART, 2x I2C, and 4x GPIO.
This design provides our smallest and lowest profile solution yet. The Sprocket and Jetson TX2, TX2i or TX1
stack can be mounted flat in the smallest of spaces, perfect for space constrained payloads such as that of a
drone.
Product Features and Specifications
Feature
Sprocket Carrier for NVIDIA Jetson TX2/TX1
Module Compatibility
NVIDIA Jetson TX2, NVIDIA Jetson TX2i, NVIDIA Jetson TX1
GPU
Jetson TX2/TX2i:
-
NVIDIA Pascal™, 256 CUDA cores (Up to 1.3 GHz)
Jetson TX1:
-
NVIDIA Maxwell™, 256 CUDA cores (998 MHz)
CPU
Jetson TX2/TX2i:
-HMP Dual Denver 2/2MB L2 + Quad ARM® A57/2MB L2
Jetson TX1:
-Quad ARM® A57/2MB L2
Dimensions
87mm x 50mm (3.425” x 1.968”)
Single-
sided assembly, all components fit “under” the module – for slimmest
design possible in Z-axis
Video Input
1 x MIPI CSI-2 Input
x4 or x2 lane configuration (30-pin connector)
USB
1 x USB OTG (Micro-AB)
UART
2 x 3.3V from TX2/TX2i/TX1 UART0 and UART1
Pico-blade SMT RA (shared)
I2C
2 x I2C Ports @ 3.3V
Pico-blade SMT RA (shared)
GPIO
4 bits of 3.3V (level shifted GPIO)
Pico-blade SMT RA (shared)
LEDs
+5V/+3.3V/RESET LEDs
Input Power
+12V to +16V DC Input Range
Buttons
Power, Reset, Recovery
Operating Temperature
-40°C to +85°C (-40°F to +185°F)
1
Weight
28g
Accessories
Cable Kit
Warranty and Support
1 Year Warranty
[1] The Jetson TX2/TX1 Module is rated for -25°C to +80°C (measured at thermal heat plate)
