Connect Tech Sprocket Carrier, Руководство пользователя

Страница: 16 / 22

Sprocket Carrier for NVIDIA® Jetson™ TX2/TX2i/TX1
Users Guide
www.connecttech.com
Document: CTIM-00152
Revision: 0.10
Page 16 of 22
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2019/04/01
Auto Start
The Sprocket Carrier has an on-board Auto Start Functionality, the module will boot automatically when
power is applied.
Note: Due to the changes done to the PMIC circuitry of the TX2i Jetson Module the Sprocket Carrier will always
remain ON when in AT (Automatic Power ON) and ATX (Push Power button) modes. This will cause the Sprocket
Carrier to automatically power ON when voltage is applied to the system. The system will in addition be unable to
shut down in software (Soft Shutdown), due to the characteristics of the TX2i power circuitry as such the system
will perform a Reset/Reboot function.
Switch Description
S1 Push Button Switch – Reset
Function
NVIDIA Jetson TX2/TX2i/TX1 Reset
Location S1
Pinout
Switch Description
S1 RST_IN# Switch
S2 Push Button Switch – Force Recover
Function
NVIDIA Jetson TX2/TX2i/TX1 Force Recovery
Location S2
Pinout Switch Description
S2 FORCE_RECOV# Switch
S3 Push Button Switch – Power Button
Function
NVIDIA Jetson TX2/TX2i/TX1 Power
Location S3
Pinout Switch Description
S3 PWR_BTN# Switch